A guide to planning and creating the heart of your home
Accurate measurements as indicated in the measuring procedure are the key elements we will need to plan your new kitchen. If you can come to our Store with the draft Measurement and with this information, our kitchen specialists will be able to help design the kitchen of your dreams.
Soni Interiors Measurement Form and Instruction
MeasurementOrderForm2.pdf
Adobe Acrobat document [574.2 KB]
FLOOR PLAN
Before any planning can start we must know the exact dimensions available to work with. Using the measuring procedure illustrated, carefully prepare a simple floor plan of your existing kitchen. Your completed floor plan should resemble the diagram shown below. Make sure you show exact locations of doors, windows, hood vents, exhaust, gas line, water line, drains, switches, outlets, light fixtures, and heat vents. Double check all measurements.
Horizontal Measurement
1. Measure from wall to wall at 36" height.
2. Measure from corner to window or door opening.
3. Measure across opening from trim edge to trim edge.
4. Measure from edge of trim to far wall. Compare sum of #2, #3 and #4
measurements to step #1.
5. Mark exact location of water, drain, gas lines and electrical outlets and
switches on drawing.
6. Measure from wall to wall above window and compare to #1.
Vertical Measurement
7. Measure from floor to window sill.
8. Measure from window sill to top of window.
9. Measure from top of window to ceiling.
10. Measure from floor to ceiling – Compare to sum of #7, #8 and #9
11. Remember to indicate all permanent appliances like stove, fridge,
Dishwasher, Oven, microwave oven, etc.
Soni Interiors
201 Hickman Dr.
Sanford, FL 32771
Phone: 407 323 5444
Fax: 407 323 0701
Hours of Operation:
Mon-Sat 10:00-5:00
Sun Closed
Information
Print